Site Planning & Implementation
Site Planning & implementation
CurveBeam AI is commited to supporting its customers in all aspects of integrating our imaging solutions into their practice.
Quick Nav:
Space & Siting
Room size, layout, and final siting requirements may vary based on state regulations, facility type, and clinical workflow. Final requirements should always be confirmed with applicable state regulatory authorities.
Typical Site Conditions (Most Installs)
- Fits through a standard doorway for installation
- Typical Installation completed in less than a week
- Minimal footprint & buildout
- 8′ ceiling height typically sufficient
- Plugs into standard appliance outlet
- Fits through a standard doorway for installation
- Typical Installation completed in less than a week
- Minimal footprint & buildout
- 8′ ceiling height typically sufficient
- Plugs into standard appliance outlet
To ConFirm During Planning
- Room layout
- Shielding Specifications
- Generated from room layout and use assumptions by qualified medical physicist
- Final shielding specifications vary by state and facility setting, and adjacent spaces
- State regulations
Staffing & Workflow
Regulatory REquirements
- Staffing requirements for CT operation vary by state and must be confirmed with state regulatory authorities.
- Accreditation for advanced diagnostic imaging requires:
- a registered technologist (RT) at minimum, for system operation
- a board certified radiologist for interpretation
CurveBeam AI Provides:
- On-site training for system operation and workflows
- Go-live support to ensure proper system use
- Ongoing training resources as needed
RT can operate
RT(CT) can operate
Unspecified operator regulations
State-level overview of cone beam CT operator requirements
An RT (CT) is required in the states of Arizona and Rhode Island. In Oregon, an RT may scan the foot/ankle, knee and upper extremities. An RT(CT) is required for hip/pelvis.
This map is provided for general reference only. State regulations and enforcement interpretations may change and should always be confirmed with the appropriate state regulatory authority.
Seamless it/pacs Integration
Security & compliance:
- No wireless components
- Limited network access required
- No cloud-based components
- Retention policy alignment
Customer typically provides:
- Network access/VLAN policies
- PACS endpoint details
- Security review
CurveBeam Ai Typically Provides:
- DICOM conformance statement/integration guidance
- PACS/modality worklist configuration support
- PACS/modality worklist go-live support
- IT infrastructure hardware (server, workstation, licensing, UPS)
service, maintenance & quality assurance
preventive maintenance (pm)
- Annual preventive maintenance is recommended to support system performance and reliability.
quality assurance (QA)
- Routine quality assurance activities are recommended, with frequency determined by facility policy and applicable accreditation requirements.
- Quarterly QA is commonly implemented in clinical settings.
CurveBeam Ai Typically Provides:
- Offers service and maintenance agreements to support preventive maintenance, system performance, and regulatory compliance.
Accreditation & compliance
cms accreditation requirement for advanced diagnostic imaging
CMS requires accreditation for facilities providing the technical component of advanced diagnostic imaging (ADI) services in order to receive Medicare reimbursement. This requirement applies to non-hospital settings, including physician offices and independent diagnostic testing facilities. Accreditation must be obtained through a CMS-designated accrediting organization prior to billing Medicare. For full details, refer to the CMS Advanced Diagnostic Imaging (ADI) Accreditation Policy.
what the process looks like
Before Install
- Determine site category & ADI applicability
Pre Go-Live
- Accreditation application & policies/protocols
Go-Live
- Maintain QA & documentation
CMS-designated adi accrediting bodies
CurveBeam AI provides:
- Guidance through the accreditation process
- Documentation support
- Coordination with accrediting bodies
- Ongoing support for re-accreditation
